Combination of chemical coagulation and membrane-based separation for dairy wastewater treatment.

An important factor resulted from the ascension of the milk and milk-based by-products production is many effluents directly released into the environment. The main objective of this study was to evaluate the efficiency of the combination of the chemical coagulation, with ferric chloride as a coagulant, and the membrane separation processes (MSP) and reverse osmosis (RO) processes in the treatment of effluents from a powdered milk dairy industry. To evaluate the effectiveness of the integration of these mechanisms, the characterization of the effluents was carried out through Total Nitrogen (Ntotal), Total Organic Carbon (TOC), Chemical Oxygen Demand (COD), color, pH, and turbidity analysis. Regarding the treatments with ferric chloride, the Ntotal removal was up to 55.7% (concentration of 1.2 g L- 1) and the color up to 50% (0.7 g L- 1). For the MSP and RO treatments, the color removal was up to 100% (1st RO), turbidity up to 100% (1st RO), COD up to 98.7% (3rd RO), and TOC up to 96.7% (3rd RO). Finally, the integration of the chemical coagulation and MSP processes was efficient for the treatment of dairy industry wastewater and provides the return of water in appropriate characteristics according to legislation.

Microencapsulation of Brazilian Cherokee blackberry extract by freeze-drying using maltodextrin, gum Arabic, and pectin as carrier materials.

There are many blackberry cultivars in Brazil; however, the characteristics and applications of the Cherokee cultivar have not yet been widely studied. For this reason, this research investigated the behaviour of maltodextrin (MD), gum Arabic (GA), and pectin (PEC), as carriers combined in different proportions (20% MD, 15% MD + 5% GA, 15% MD + 5% PEC), on encapsulation of Cherokee blackberry pulp extract obtained by freeze-drying. The results of moisture content (2.73-3.36%), water activity (aw) (0.11-0.15), solubility (52.40-54.11%), hygroscopicity (17.59-21.11%), colour (hue 0.24-0.32), retention of anthocyanins (51.55-60.53%), total phenolic compounds (39.72-70.73 mg GAE/100g), antioxidant activity at 25 mg/mL (77.89-80.02%), IC50 (12.26-14.53), simulated in vitro digestion and morphology were discussed. Concerning morphology, blackberry powders had irregular structures and amorphous structures. Comparatively, the best results were obtained for MD-GA. MD-GA presented the highest content of phenolic compounds (70.73 ± 1.84 mg GAE/100g) and antioxidant activity (80.02%), as well as the lowest IC50 value (12.26). In general, all powders showed an increase in phenolic compounds during in vitro digestion, because of the pH conditions and digestive enzymes present in the simulated digestive fluid. This result shows that the wall material provides protection, since the blackberry rich extract (RE) showed degradation of phenolic compounds in in vitro digestion. In this sense, freeze-drying is a suitable technique for the encapsulation of Cherokee blackberry pulp extract.

Use of membranes for the treatment and reuse of water from the pre-cooling system of chicken carcasses.

Poultry processing plants generate large amounts of wastewater in the many steps necessary to provide high quality and safe products. Carcass chilling is one of these steps, where the temperature of the carcass is reduced from 40°C to 4°C, for reducing the growth rate of microorganisms and affecting flavour, texture and appearance. In this operation, carcasses are continually displaced through a series of two tanks (called pre-chiller and chiller) filled with cold water, thus being responsible for a considerable amount of wastewater generation. This work aimed to regenerate the wastewater of the pre-chiller tank employing microfiltration (pore size 0.10 and 0.20 µm) and ultrafiltration (UF; MWCO 10 and 50 kDa) polymeric membranes in bench and pilot scales, with the final purpose of reuse. Membrane performance was evaluated in terms of the capacity of removing the contaminants and producing sufficient permeate flux in different working pressures. Bench-scale UF membrane presented the highest initial permeate flux of 112.1 L/m2h at 200 kPa. The four membranes tested presented good retention of microorganisms, with apparent rejection of up to 100%. Pilot-scale membranes presented better apparent rejection, with retentions above 99% for turbidity, apparent colour and fat content. Moreover, organic matter retention was also very high, up to 94% for chemical oxygen demand and 92% for total organic carbon. The use of membranes seems to be a promising approach for recycling and reuse of poultry pre-chiller wastewater.

Yerba mate (Ilex paraguariensis St. Hil.) extract inhibits hand-rolled cornhusk cigarette smoke-induced oxidative pulmonary damage.

The aim of this study was to investigate the effects of yerba mate (Ilex paraguariensis St. Hil.) extract (YME) on oxidative stress parameters and pathological changes in the lungs of mice chronically exposed to hand-rolled cornhusk cigarette (HRC) smoke. Twenty-four male Swiss mice were divided into four groups exposed to the following treatments: control (ambient air), HRC, YME, and HRC plus YME. The animals were exposed to four HRCs per session, with 3 sessions/day, every day for 30 days. Twenty-four hours after the last inhalation, the mice were killed, and the left lungs were removed. The results showed that HRC contains elevated levels of tin and carbon oxide, but less arsenic, cobalt, manganese, and selenium than commercial cigarettes. YME administration reversed fibrosis, alveolar enlargement, and hemorrhage induced by HRC smoke. In addition, the YME and HRC significantly reduced the production of oxidants, oxidative damage and promoted a significant increase in total thiol. In conclusion, exposure to HRC smoke compromised pulmonary histoarchitecture by promoting structural changes and increasing oxidative stress in tissues. However, concomitant treatment with YME regulated the redox state and reduced the harmful effects of HRC smoke exposure in the lungs.

Ultrasound-assisted extraction of chromium from residual tanned leather: An innovative strategy for the reuse of waste in tanning industry.

The tannery industry generates huge amount of waste with high Cr concentration, being classified as a dangerous waste. The development of alternative treatments for these residues aiming environmental friendly protocols are important topics of research. In this work, the use of ultrasound (US) energy for Cr removal from residual tanned leather was investigated. Ultrasound-assisted extraction (UAE) experiments were carried out in several systems as ultrasonic baths, cup horns, and probes, allowing to evaluate several frequencies (20-130 kHz) and power delivered to the extraction system. The following experimental conditions were evaluated: extraction solution (HCl, HNO3, H2SO4, CH2O2 and C2H2O4), temperature (10-90 °C), time (1-40 min), US amplitude (10-90%), feedstock amount (50-450 mg), and concentration of extraction solution (0.1-4 mol L-1). A multivariate factorial design with 10 axial points and 3 central points was applied. After UAE optimization an efficiency of 92% was achieved for Cr removal using 150 mg of feedstock, 3 mol L-1 HNO3, at 30 °C, 90% of amplitude, and 30 min. The same efficiency was not observed using mechanical stirring (100-500 rpm), which was lower than 65%. To prove the applicability of the proposed process some experiments for scaling up were performed using several reactor loads (1-9 L). Moreover, using the proposed UAE process Cr was efficiently removed at lower reaction time and at room temperature only by using US and diluted acid solution, representing energy and reagents saving.

Ilex paraguariensis: Potential antioxidant on aluminium toxicity, in an experimental model of Alzheimer's disease.

Ilex paraguariensis, yerba mate is a native plant from the southern region of Brazil. Studies showed that yerba mate has an antioxidant potential, which could help to reduce the risk of developing neurodegenerative diseases, as Alzheimer's Disease (AD). It's known that I. paraguariensis grows in acid soils with aluminium (Al), which is bioavailable in these soils. Al has a neurotoxic potential related with the progression of neurological disorders. This study aim was to evaluate the potential of I. paraguariensis in the etiology of AD using strains of Caenorhabditis elegans and the concentration of Al and antioxidants in the yerba mate extract. The results of the I. paraguariensis infusions made at 65°C and at 75° C show that there was no significant difference between both temperatures when preparing the tea infusion in relation to the presence of Al, methylxanthines, phenolic compounds and flavonoids. Additionally, in the case of Al, there was no difference between the extracts prepared at both temperatures. The behavioral parameters of C. elegans were altered after a long-term exposure to both factors: I. paraguariensis extract and Al. Through the antioxidant levels results along with the Al content on the Acetylcholinesterase (AChE) activity it is possible to observe that the acute and chronic exposure to Al and I. paraguariensis leaves extract are very similar to wild-type worms. Moreover, we can observe that the results in both the transgenic strains long-term exposed to I. paraguariensis leaves extract and to the Al concentrations presented an increase in the AChE activity.

Ultrasound-Assisted Extraction of Cr from Residual Tannery Leather: Feasibility of Ethylenediaminetetraacetic Acid as the Extraction Solution.

In this work, the use of ultrasound energy for chromium removal from residual tannery leather was investigated. The following parameters were evaluated: complexation temperature (60-90 °C), chromium/complexant molar ratio (1:0 to 1:6), complexation time (30-120 min), washing steps (1-14), washing temperature (25-80 °C), and washing time (1-10 min). For all evaluated conditions, chromium removal was monitored by flame atomic absorption spectrometry. The residual tannery leather after different extraction strategies were characterized using a scanning electron microscopy. For the proposed method, the optimized conditions were: 3 g of residual tannery leather to be treated, 100 mL of extraction solution (chromium/complexant molar ratio of 1:3), at 80 °C and 30 min of sonication. To complete the chromium removal, only five washing cycles (50 mL of water at 50 °C) of 3 min were required. Using these conditions, a chromium removal higher than 98% was achieved. Under the same reaction conditions, the results were compared with mechanical stirring (100 rpm), which allowed observing the significant effects of ultrasound for chromium removal. Comparing to the conventional method, the total time of the process (including extraction and washing steps) was decreased from 150 to 45 min and the water volume for the washing was reduced from 450 to 250 mL. Therefore, the proposed ultrasound-assisted process can be considered as a suitable alternative for chromium removal from residual tannery leather.

Purification of inulinases by changing the ionic strength of the medium and precipitation with alcohols.

The present study evaluated the purification of inulinase by changing the ionic strength of the medium by addition of NaCl and CaCl2 followed by precipitation with n-propyl alcohol or iso-propyl alcohol. The effects of the concentration of alcohols and the rate of addition of alcohols in the crude extract on the purification yield and purification factor were evaluated. Precipitation caused an activation of enzyme and allowed purification factors up to 2.4-fold for both alcohols. The purification factor was affected positively by the modification of the ionic strength of the medium to 0.5 mol.L-1 NaCl before precipitation with the alcohol (n-propyl or iso-propyl). A purification factor of 4.8-fold and an enzyme yield of 78.1 % could be achieved by the addition of 0.5 mol.L-1 of NaCl to the crude extract, followed by the precipitation with 50 % (v/v) of n-propyl alcohol, added at a flow rate of 19.9 mL/min.

Extraction, chemical characterization and antioxidant activity of Litchi chinensis Sonn. and Avena sativa L. seeds extracts obtained from pressurized n-butane.

The extraction of litchi (Litchi chinensis Sonn.) and oat (Avena sativa L.) seeds were investigated using n-butane as pressurized solvent by evaluating the effect of pressure in the range of 7-100 bar and temperature from 25 to 70 °C on the extract yield and chemical composition together with the antioxidant activity of the extracts obtained. It was experimentally observed extraction yields for both seeds up to ~3.5 wt%, with a total phenolic content around 126.4 mg GAE/100 g of extract, and an antioxidant activity up to 78.36%. Oat seeds extract presented higher values of these parameters evaluated compared to litchi extract. Based on the results found, it seems that n-butane may be a promising solvent to conventional extraction methods, as mild operating conditions and eco-friendly solvent can be used to provide good results without any residues in the final product.

Purification of inulinases by changing the ionic strength of the medium and precipitation with alcohols

ABSTRACT The present study evaluated the purification of inulinase by changing the ionic strength of the medium by addition of NaCl and CaCl2 followed by precipitation with n-propyl alcohol or iso-propyl alcohol. The effects of the concentration of alcohols and the rate of addition of alcohols in the crude extract on the purification yield and purification factor were evaluated. Precipitation caused an activation of enzyme and allowed purification factors up to 2.4-fold for both alcohols. The purification factor was affected positively by the modification of the ionic strength of the medium to 0.5 mol.L-1 NaCl before precipitation with the alcohol (n-propyl or iso-propyl). A purification factor of 4.8-fold and an enzyme yield of 78.1 % could be achieved by the addition of 0.5 mol.L-1 of NaCl to the crude extract, followed by the precipitation with 50 % (v/v) of n-propyl alcohol, added at a flow rate of 19.9 mL/min.

Continuous flow electrocoagulation in the treatment of wastewater from dairy industries.

Dairy industry wastewater contains high levels of organic matter, consisting mainly of fat, protein and products of their partial microbial decomposition. In the present study, the use of continuous electrocoagulation is proposed for the primary treatment of dairy wastewater. The electrochemical treatment was carried out in a continuous flow cell with aluminum electrodes. The influence of the voltage, the distance between the electrodes and the hydraulic residence time (HRT) on the process performance was assessed, by measuring the removal of color, turbidity, total organic carbon (TOC) and chemical oxygen demand (COD). The optimum voltage, distance between the electrodes and HRT were 10 V, 1 cm and 90 min, respectively, yielding a current density of 13.3 A.m(-2). Under these conditions, removal of color, turbidity, TOC and COD were 94%, 93%, 65% and 69%, respectively, after a steady state was reached in the continuous flow reactor.

Immobilization of inulinase from Kluyveromyces marxianus NRRL Y-7571 using modified sodium alginate beads.

An experimental design was carried out to evaluate the effect of the concentrations of sodium alginate, glutaraldehyde and activated coal on the immobilization of inulinase from Kluyveromyces marxianus NRRL Y-7571. The experimental condition of 20 g/L of sodium alginate, 50 mL/L of glutaraldehyde and 30 g/L of activated coal led to the highest specific activity (2,063.5 U/mg of protein), corresponding to an enhancement of about 26 times compared to the activity of the free enzyme (79.1 U/mg of protein). The effect of pH and temperature on the immobilized enzyme activity was also evaluated, showing optimal activities at pH of 5.5 and 55 °C. The study of storage of immobilized inulinase in different temperatures showed that the extract kept its initial activity after 43 days of storage at 40 and 50 °C and after 138 days of storage either at 4 or 25 °C.

Optimization of 2-ethylhexyl palmitate production using lipozyme RM IM as catalyst in a solvent-free system.

This work reports the application of a lipase in the 2-ethylhexyl palmitate esterification in a solvent-free system with an immobilized lipase (Lipozyme RM IM). A sequential strategy was used applying two experimental designs to optimize the 2-ethylhexyl palmitate production. An empirical model was then built so as to assess the effects of process variables on the reaction conversion. Afterwards, the operating conditions that optimized 2-ethylhexyl palmitate production were established as being acid/alcohol molar ratio 1:3, temperature of 70 degrees C, stirring rate of 150 rpm, 10 wt.% of enzyme, leading to a reaction conversion as high as 95%. From this point, a kinetic study was carried out evaluating the effect of acid:alcohol molar ratio, the enzyme concentration and the temperature on product conversion. The results obtained in this step permit to verify that an excess of alcohol (acid to alcohol molar ratio of 1:6), relatively low enzyme concentration (10 wt.%) and temperature of 70 degrees C, led to conversions next to 100%.

Assessment of process variables on 2-ethylhexyl palmitate production using Novozym 435 as catalyst in a solvent-free system.

This work reports the optimization of 2-ethylhexyl palmitate production by esterification reaction in a solvent-free system using a commercial lipase as catalyst. For this, a sequential strategy was performed applying three experimental designs. An empirical model was built so as to assess the effects of process variables on the reaction conversion. Afterward, the operating conditions that optimized 2-ethylhexyl palmitate production were determined to be acid to alcohol molar ratio of 1:5.5, 70 degrees C, 150 rpm and 10.5 wt% of enzyme, leading to a reaction conversion as high as 93%. From this point, a kinetic study was carried out evaluating the influence of acid to alcohol molar ratio, enzyme concentration and temperature on product yield. Results obtained in this step allow to conclude that an excess of alcohol (acid to alcohol molar ratio of 1:6), relatively low enzyme concentration (10 wt%) and temperature of 70 degrees C led to nearly complete reaction conversion.

Study of odor compounds in gaseous effluents generated during production of poultry feather and viscera meal using headspace solid phase microextraction.

This work reports the screening and characterization of odor compounds in gaseous effluents generated during the production of poultry feather and viscera meal, the by-products of the poultry meat industry. Chemical analysis was carried out by solid phase microextraction in the headspace (HS-SPME) mode. Exhaust air of thermal processing of poultry feather and viscera were sampled online from a bench-scale digester, condensed, and collected in sampling flasks. Both volatile and semivolatile organic compounds present in the condensed gases were extracted under agitation at constant temperature. The extracts were analyzed with a gas chromatograph coupled to a mass spectrometric detector (GC/MSD). The identification of compounds was carried out by comparing the mass spectra obtained with those from the Wiley library and quantification was accomplished through authentic analytical standards. For the determination of the best extraction conditions and analysis, extraction fibers of different coatings and polarities were tested: divinylbenzene/carboxen/polydimethyilsiloxane (DVB/CAR/PDMS), carbowax/divinylbenzene (CW/DVB), and polydimethylsiloxane (PDMS) and chromatography columns of different polarities: DB-WAX (polar) and DB-5 (nonpolar). The best extraction conditions and analysis of the compounds of interest were obtained by the use of the SPME fiber with DVB/CAR/PDMS coating and analysis by GC/MSD with polar capillary column. Several carboxylic acids were identified, as well as mercaptans, amines, and aldehydes of great environmental importance.

Solid waste from leather industry as adsorbent of organic dyes in aqueous-medium.

The industrial tanning of leather usually produces considerable amounts of chromium-containing solid waste and liquid effluents and raises many concerns on its environmental effect as well as on escalating landfill costs. Actually, these shortcomings are becoming increasingly a limiting factor to this industrial activity that claims for alternative methods of residue disposals. In this work, it is proposed a novel alternative destination of the solid waste, based on the removal of organic contaminants from the out coming aqueous-residue. The adsorption isotherm pattern for the wet blue leather from the Aurea tanning industry in Erechim-RS (Brazil) showed that these materials present high activity on adsorbing the reactive red textile dye as well as other compounds. The adsorbent materials were characterized by IR spectroscopy and SEM and tested for the dye adsorption (reactive textile and methylene blue dyes). The concentrations of dyes were measured by UV-vis spectrophotometry and the chromium extraction from leather waste was realized by basic hydrolysis and determined by atomic absorption. As a low cost abundant adsorbent material with high adsorption ability on removing dye methylene blue (80mgg(-1)) and textile dye reactive red (163mgg(-1)), the leather waste is revealed to be a interesting alternative relatively to more costly adsorbent materials.